Product / Front-desk access
Custom RFID Hotel Key Cards, Punta Cana
The familiar check-in handover, made property-specific.
Card construction, finish, artwork and encoding are planned together after the required credential has been confirmed.
Required credential
Card body and finish
Artwork and variable print
Building the card
The door decides first. The design follows.
A key card is one product with two independent records: what it opens, and what it looks like.
- 01
Required credential
Start from the credential the installed door hardware already reads. Everything visible on the card is chosen after that answer exists.
- 02
Card body and finish
A standard PVC body suits high-volume reissue. Wood and textured faces are chosen where the card is part of the arrival — in Cap Cana and boutique Punta Cana Village properties that is the norm rather than the exception.
- 03
Artwork and variable print
Full-face artwork, finish, room numbering and sequential codes are specified apart from the technical build, so either side can change without disturbing the other.
- 04
Encoding and reorder record
Keep the approved encoding sheet stored with the artwork file. A reorder should repeat a known card rather than restart the specification with a different buyer.
Production specification
What is fixed on every card.
These production points are fixed. Card face material, finish, artwork and encoding are decided per property.
| Card format | CR80 — 85.6 × 54 mm |
|---|---|
| Card body thickness | 0.76 mm |
| Standard operating frequency | 13.56 MHz (ISO/IEC 14443) |
| Low-frequency option | 125 kHz, where the installed system requires it |
| Minimum order | 500 pieces per artwork |
| Production time | 14–21 days after artwork approval |
Compatibility
Confirm first. Customise second.
Credential technology, encoding and supported functions depend on the installed system.
See the process ↗FAQ
Before you order.
01Which lamination suits this coast?+
Matte. Salt spray and sun cream attack the printed surface rather than the chip, and matte hides handling far better than gloss.
02Does a wood card warp in the humidity?+
Not if it is specified properly: a thin sealed veneer over a stable core. The card has to stay flat enough for the door reader to read it every time.
03What is the real difference between recycled PVC and plant fibre?+
Recycled PVC behaves exactly like the standard card and nobody at the front desk notices. Plant fibre looks and feels different but will not take a gloss finish.
Your project
Start with the property and the installed system.
Share the use case, product direction, quantity, timing and any credential information already available.
Build your brief ↗